| Q: | Is it a solid rubber or semi-pneumatic tire? | |
| A: |
NO-MOR FLATSŪ
is a revolutionary bicycle inner tube made of variable density air
cushioned lightweight polymers. |
|
| Q: | Is it fitted with a foam or gel sealant? | |
| A: |
NO-MOR FLATSŪ
is a revolutionary bicycle inner tubes contain no foam or gel sealants. |
|
| Q: | How does it ride? | |
| A: |
Most people
can't tell the difference between a tire equipped with NO-MOR FLATSŪ and
one with a conventional bicycle inner tube. |
|
| Q: | What tire pressure does it offer? | |
| A: |
NO-MOR FLATSŪ
is scientifically engineered to provide the same ride as a
properly-inflated conventional inner tube. NO-MOR FLATSŪ inner tubes are
available for standard pressure tires (50-60 lbs.) and high pressure
tires (85-95 lbs.). |
|
| Q: | Why doesn't it go flat? | |
| A: |
NO-MOR FLATSŪ
features and air cushioned "tube" of lightweight polymers. When combined
with the sidewalls of the tire, the tube will not go flat even when
"torture tested" with an ice pick or an electric drill. |
|
| Q: | Is it difficult to install? | |
| A: |
Each NO-MOR
FLATSŪ inner tube comes with complete installation instructions.
They do take time and its best if two people can assist in installation.
If you prefer not to install this product yourself, your local
professional bicycle dealer can provide this service at nominal cost. |
|
| Q: | How long will it last? | |
| A: | NO-MOR FLATSŪ is guaranteed to never go flat, blow out or lose air. When you wear out your tire casings, you can reinstall your NO-MOR FLATSŪ inner tubes into your new tires. | |
| Q: | Is NO-MOR FLATSŪ affected by heat or cold? | |
| A: |
NO-MOR FLATSŪ
has been tested to 150 degrees above and below zero with no appreciable
difference in ride characteristics. |
|
| Q: | If the bicycle is stored in the garage or basement through the winter months, will it go flat? | |
| A: |
NO-MOR FLATSŪ
is unconditionally guaranteed to NEVER GO FLAT, even when stored for
years. |
|
| Q: | Will it make the bicycle tire last longer? | |
| A: |
NO-MOR FLATSŪ
increases the tire life in two ways: First, since the tire is under
constant air pressure and is never over or under inflated, it will last
longer. Second, due to its unique properties, the NO-MOR FLATSŪ inner
tube will support a bicycle tire that has been cut, gouged or weathered;
whereas a conventional inner tube would "pinch" itself through these
holes and cracks and go flat. |
|
| Q: |
If air cannot be added to the inner tube, will it support a large person or a heavy load? |
|
| A: |
The design
construction of NO-MOR FLATSŪ inner tube allows it to support more
weight and ride easier. |
|
| Q: | Will it contribute to damage of the bicycle rim? | |
| A: |
NO-MOR FLATSŪ
provides added protection to the bicycle rim. It will not bottom out
when ridden over potholes, or off curbs. |
|
| Q: | How can NO-MOR FLATSŪ make bicycling safer? | |
| A: |
Many bicycle
accidents are caused by blowouts especially in heavy street traffic.
NO-MOR FLATSŪ are Unconditionally Guaranteed to NEVER BLOW OUT. |
|
| Q: | Is it expensive? | |
| A: |
When you
consider that you will never have purchase or repair another bicycle
inner tube, NO-MOR FLATSŪ is an exceptional value. |
Grants Pass, OR
(541) 476-5321